On this part, you can configure loop current, impedance matching, CID service and so on.

Parameter DBID_CODEC_LOOP_CURRENT
Description
Permitted Values Integer
Default 26
Web UI FXS > Preferences > Miscellaneous > Loop Current
Parameter DBID_IMPEDANCE_MATCHING
Description
Permitted Values 0-US PBX,Korea,Taiwan(600)
1-Standard(900)
2-Japan CO(600+1uF)
3-Bellcore(900+2.16uF)
4-CTR21(270+750
Default 0
Web UI FXS > Preferences > Miscellaneous > Impedance Matching
Parameter DBID_SIP_CID_ENABLE
Description It enables or disables the caller id.
Permitted Values 0-Disable
1-Enable
Default 1
Web UI FXS > Preferences > Miscellaneous > CID Service
Parameter DBID_SIP_CWCID_ENABLE
Description
Permitted Values 0-Disable
1-Enable
Default 0
Web UI FXS > Preferences > Miscellaneous > CWCID Service
Parameter DBID_REGIONAL_CALLER_ID_METHOD
Description It configures the caller ID mode of the FXS port.
Permitted Values 0-Bellcore
1-DTMF(Finland)
2-DTMF(Denmark)
3-ETSI DTMF
4-ETSI DTMF With PR
5-ETSI DTMF After Ring
6-ETSI FSK
7-ETSI FSK With PR
8-DTMF(Brazilian)
9-DTMF(Denmark) With PR
Default 0
Web UI FXS > Preferences > Miscellaneous > Caller ID Method
Parameter DBID_IDT_TIME
Description It configures the delay time (in seconds) for the phone to automatically dial out the entered phone number without pressing a send key.
Permitted Values Integer
Default 5
Web UI FXS > Preferences > Miscellaneous > Dial Time Out (IDT)
Parameter DBID_DIAL_CHAR
Description After entering a number, you can press the speed dial key to make a quick call without waiting. You can set the speed dial key to * or #. If it is disabled, the speed dial key cannot be used.
Permitted Values 0-Disable
1-#
2-*
Default 0
Web UI Phone > Preferences > Miscellaneous > Call Immediately Key
Parameter DBID_ICMP_PING
Description It enables or disables the ping feature of the phone.
Permitted Values 0-Disable
1-Enable
Default 1
Web UI FXS > Preferences > Miscellaneous > ICMP Ping
Parameter DBID_ESCAPED_CHAR_ENABLE
Description It enables or disables the phone to convert ASCII code into corresponding symbol.
Permitted Values 0-Disable
1-Enable
Default 0
Web UI FXS > Preferences > Miscellaneous > Enable Escaped Char
Parameter DBID_BELLCORE_STYLE_CONFERENCE
Description
Permitted Values 0-Disable
1-Enable
Default 0
Web UI FXS > Preferences > Miscellaneous > Bellcore Style 3-Way Conference
Parameter DBID_CODEC_OPEN_VOLTAGE
Description
Permitted Values Integer
Default 48
Web UI FXS > Preferences > Miscellaneous > On-hook Voltage
Parameter DBID_REGIONAL_RING_OFFSET
Description
Permitted Values Integer between 0 and 50
Default 0
Web UI FXS > Preferences > Miscellaneous > Ring Offset (0-50 V)
Parameter DBID_INFO_CONTENT_TYPE
Description
Permitted Values 0-broadsoft
1-hook-flash
2-telephone-event
3-dtmfinfo+xml
4-dtmf-relay
Default 0
Web UI FXS > Preferences > Miscellaneous > Info Content Type
Parameter DBID_HOOK_FLASH_NUMBER_ENABLE
Description
Permitted Values 0-Disable
1-Enable
Default 0
Web UI FXS > Preferences > Miscellaneous > HooK Flash Number Enable
Parameter DBID_REG_FAIL_SET_SLIC_OPEN_MODE_ENABLE
Description
Permitted Values 0-Disable
1-Enable
Default 0
Web UI FXS > Preferences > Miscellaneous > Reg Fail Set Slic Open Mode Enable
Author：admin  Create time：2023-11-24 16:57
Last editor：admin  Update time：2024-01-03 16:20