The following table lists the parameters you can use to configure the web server type.

Parameter DBID_WEB_HTTP_DISABLE
Description It enables or disables to access the web user interface of the phone over a non-secure tunnel (HTTP).
Permitted Values 0-Enable
1-Disable
Default 0
Web UI Administration > Management > Administrator Settings > Web Access > Http Web Access
Parameter DBID_WEB_PORT
Description It configures the port used to access the web user interface of the phone over a non-secure tunnel (HTTP).
Permitted Values Integer
Default 80
Web UI Administration > Management > Administrator Settings > Web Access > Web Port
Parameter DBID_WEB_SSL_DISABLE
Description It enables or disables to access the web user interface of the phone over a secure tunnel (HTTPS).
Permitted Values 0-Enable
1-Disable
Default 0
Web UI Administration > Management > Administrator Settings > Web Access > Https Web Access
Parameter DBID_WEB_SSL_PORT
Description It configures the port used to access the web user interface of the phone over a secure tunnel(HTTPS).
Permitted Values Integer
Default 443
Web UI Administration > Management > Administrator Settings > Web Access > Web SSL Port

Auto logout time defines how long the phone will log out of the web user interface automatically when you do not perform any actions on the web user interface. Once logging out, you must re-enter username and password for web access authentication.

The following table lists the parameter you can use to configure the auto logout time.

Parameter DBID_WEB_IDLE_TIMEOUT
Description It configures the timeout interval (in minutes) for web access authentication.
Permitted Values Integer
Default 5
Web UI Administration > Management > Administrator Settings > Web Access > Web Idle Timeout (0 - 60min)

You can access the web user interface quickly using the request URI. It will locate you in the Status web page after accessing the web user interface. It is helpful to quickly log into the web user interface without entering the user name and password on the login page.

Parameter WebRemoteLegalIP
Description It configures the valid IP address to access the web user interface of the phone.
If it is set to “0.0.0.0”, you can use any IP address to access the web user interface of the phone.
Permitted Values IP Address
Default 0.0.0.0
Web UI Administration > Management > Administrator Settings > Web Access > Allowed Remote IP (IP1;IP2;…)
Author:admin  Create time:2023-12-05 11:04
Last editor:admin  Update time:2024-01-03 16:20