The following table lists the parameters you can use to configure Wi-Fi.
| Parameter | RadioOff |
|---|---|
| Description | It activates or deactivates the Wi-Fi mode. Note: It works only if “static.wifi.function.enable” is set to 1 (Enabled). |
| Permitted Values | 0-Disabled 1-Enabled |
| Default | 0 |
| Web UI | Wireless > Basic > Radio On/Off |
| Phone UI | Menu > Basic > Wi-Fi > Wi-Fi |
| Parameter | SSID1 |
|---|---|
| Description | It configures the SSID of a specific wireless network.SSID is a unique identifier for accessing wireless access points. Note: It works only if “static.wifi.enable” is set to 1 (Enabled). |
| Permitted Values | ASCII code from 1 to 32 in length |
| Default | Blank |
| Web UI | Wireless > Basic > Multiple SSID |
| Phone UI | Menu > Basic > Wi-Fi > Known Network(s) > Add > SSID |
| Parameter | wireless_connection_mode |
|---|---|
| Description | It disable or enable the AP mode. |
| Permitted Values | on-AP off-Repeater |
| Default | Repeater |
| Web UI | Wireless > Basic > AP Switch |
| Parameter | |
|---|---|
| Description | It configures the transmission protocol in 2.4G mode. |
| Permitted Values | 0-11b/g mixed mode 1-11b only 2-11g mode 3-11b/g/n mixed mode 4-11n only |
| Default | 3 |
| Web UI | Wireless > Basic > Network Mode |
| Parameter | NotBroadcastSSIDEmptyProbeAction |
|---|---|
| Description | It configures the transmission protocol in 2.4G mode. |
| Permitted Values | enable disable |
| Default | 0 |
| Web UI | Wireless > Basic > broadcast (SSID) |
| Parameter | Channel |
|---|---|
| Description | It configures 2.4GWIFI working transmission channel. |
| Permitted Values | Channel |
| Default | auto |
| Web UI | Wireless > Basic > Frequency (Channel) |
| Parameter | HT_OpMode |
|---|---|
| Description | |
| Permitted Values | 0-mixed mode 1-Green Field |
| Default | 0 |
| Web UI | Wireless > Basic > HT Physical Mode Operating Mode |
| Parameter | |
|---|---|
| Description | It configures the channel bandwidth. |
| Permitted Values | 0-20 1-20/40 |
| Default | 0 |
| Web UI | Wireless > Basic > Channel BandWidth |
| Parameter | DBID_WIFI_AUTH_MODE |
|---|---|
| Description | It configures the security mode of a specific wireless network. |
| Permitted Values | NONE WPAPSK WPA2PSK OPEN SHARED |
| Default | Blank |
| Web UI | Wireless > Wireless > Wireless Connection > connect > Authentication Wireless > Wireless > Wireless Connection > Add > Authentication |
| Phone UI | Menu > Basic > Wi-Fi > Known Network(s) > Add > Security Menu > Basic > Wi-Fi > Known Network(s) > Option > Edit > Security |
| Parameter | DBID_WIFI_PASS_PHRASE |
|---|---|
| Description | It configures the password of a specific wireless network. Note: It works only if “RadioOff” is set to 1 (Enabled). |
| Permitted Values | |
| Default | Blank |
| Web UI | Wireless > Wireless > Wireless Connection > connect > Password |
| Phone UI | Menu > Basic > Wi-Fi > Avaliable Network(s) > connect > Password |
Author：admin Create time：2023-08-23 14:52
Last editor：admin Update time：2023-12-22 13:50
Last editor：admin Update time：2023-12-22 13:50
