Telnet is a common method to remotely control Web servers.

The following table lists the parameters you can use to configure the telnet.

Parameter RemoteTelnet
Description It enables or disables the telnet feature.
Permitted Values 0-Disable
1-Enable
Default 0
Web UI Administration > Management > Administrator Settings > Telnet Access > Remote Telnet
Parameter TelnetPort
Description It configures the port used to access the background port of the phone by telnet.
Permitted Values Integer
Default 23
Web UI Administration > Management > Administrator Settings > Telnet Access > Telnet Port
Parameter telnet_allow_ip
Description It configures the IP address that used to access the Telnet feature.
If it is set to “0.0.0.0”, you can use any IP address to access the web user interface of the phone.
Permitted Values IP Address
Default 0.0.0.0
Web UI Administration > Management > Administrator Settings > Telnet Access > Allowed Remote IP (IP1;IP2;…)
Parameter HostName
Description It configures the user name of the device.
Permitted Values String
Default FIP13G
Web UI Administration > Management > Administrator Settings > Telnet Access > HostName
Author：admin  Create time：2023-08-25 14:35
Last editor：admin  Update time：2023-12-22 13:50