Parameter DBID_SIP_DIALMODE
Description It enables or disables the digit map feature.
Permitted Values 0-Disable
1-Enable
Default 0
Web UI Phone > Dial Rule > General > Dial Rule
Parameter DBID_SIP_DIALPLAN_POLICY
Description If accept it, the phone can make outgoing calls even if the number rules do not match the digit map rules.
If reject it, when the number rules do not match the digitmap rules, the outgoing calls cannot be made.
Permitted Values 0-Accept
1-Reject
Default 0
Web UI Phone > Dial Rule > General > Unmatched Policy
Parameter Dial_Rule_List
Description It configure account selected when the call rules match and dial rule.
Tips: Dial Rule controls how calls will be dialed using this line. It can add a Prefix to Matched Numbers and remove Digits by setting Dial Cuts.
Permitted Values String For example, Line1|<102:192.168.80.97>|Dial Out
Default Blank
Web UI Phone > Dial Rule > Add

The following are some detail description about Dial Rule.

Dial Rule
1. ‘0 1 2 3 4 5 6 7 8 9 * #’ : Legal characters.
2. ‘x’ : Lowercase letter x stands for one legal character.
3. ‘[sequence]’ :To match one character from a sequence. For example:[0-9]：match one digit from 0 to 9;[23-5*]：match one character from 2 or 3 or 4 or 5 or *.
4. ‘x.’ : Match to x，xx，xxx，xxxx, … ； For example?01.’can match’0’?01’?011’?011111?.
5. ‘<’dialed’:’substituted’>’ : Replace dialed with substituted. For example?’<#:23%>xx<#:23%>’，input is ‘#56#’，output is ‘23%5623%’.
6. ‘x,y’ : Make outside dial tone after dialling ‘x’, stop until dialling character ‘y’. For example: ‘<5,:><:241333>8101’, input is ‘58101’，output is ‘2413338101’.Besides telephone input 5 will have a dial tone, dial 8 after stopping at.
7. ‘T’ : Set delay time. After 2 seconds, the phone will set aside a valid number.
Author：admin  Create time：2023-09-18 11:25
Last editor：admin  Update time：2023-12-22 13:50