The following table lists the parameters you can use to configure 802.1x authentication.

Parameter static.network.vlan.dhcp_enable
Description It enables or disables the DHCP VLAN discovery feature.
Permitted Values 0-Disable
1-EAP-MD5
2-EAP-TLS
3-EAP-PEAP/MSCHAPv2
4-EAP-TTLS/EAP-MSCHAPv2
5-EAP-PEAP/GTC
6-EAP-TTLS/EAP-GTC
Default 0
Web UI Network > WAN > VLAN > DHCP VLAN > Active
Phone UI Menu > Advanced > Network > VLAN > DHCP VLAN > DHCP VLAN

Flyingvoice IP Phone supports the following authentication modes.

  1. EAP-MD5
  2. EAP-TLS (The device certificate and CA certificate are required. No password is required )
  3. EAP-PEAP/MSCHAPv2 (The CA certificate are required. )
  4. EAP-TTLS/EAP-MSCHAPv2 (The CA certificate are required. )
  5. EAP-PEAP/GTC (The CA certificate are required. )
  6. EAP-TTLS/EAP-GTC (The CA certificate are required. )

If you use the cable connection, please do the following settings for 802.1x configuration on the web interface.
Procedure

  1. Navigate to Network > WAN > 802.1x.
  2. Select the desired authentication method from the 802.1X Mode field.
  3. Enter in the User Name and Password.
Parameter DBID_8021X_MODE
Description It configures the 802.1x authentication method.
Permitted Values 0-Disable
1-EAP-MD5
2-EAP-TLS
3-EAP-PEAP/MSCHAPv2
4-EAP-TTLS/EAP-MSCHAPv2
5-EAP-PEAP/GTC
6-EAP-TTLS/EAP-GTC
Default 0
Web UI Network > WAN > 802.1x > 802.1X Mode
Parameter DBID_8021X_IDENTITY
Description It configures the 802.1x username.
Permitted Values String
Default Blank
Web UI Network > WAN > 802.1x > User Name
Parameter DBID_8021X_PASSWORD
Description It configures the 802.1x password.
Permitted Values String
Default Blank
Web UI Network > WAN > 802.1x > Password

If you use the wireless connection, you can connect to the 802.1X WIFI in IP phone, as shown in the image blow.

Author：admin  Create time：2023-10-13 16:52
Last editor：admin  Update time：2023-12-22 13:50