SAS Call Route Settings

When PBX fails, the device will enter Emergency Mode, under this mode, calls will not processed by PBX, which means the call route in FXO -> Call Route will not take effect. In order to maintain normal communication capability with PSTN line, you need to set SAS call route:

Outbound Call

  • 1.Navigate to SAS -> SAS Call Route
  • 2.Select an empty route item, click “edit”;
  • 3.Fill in the route name to identify the route for management;
  • 4.Select sas_exten in “Origin”, select FXO_1 in“Destination”(please connect FXO 1 to the telephone port before setting );
  • 5.Fill in the 8 for “Dial Prefix”, 1 for “Strip”and 0 for “Priority”;
  • 6.Click “Save & Apply”.

At this time there will be a new SAS call routing, you can dial 8 + external number to call the phone on PSTN:

If you need to use two FXO ports, you need to add another route item:

****

Note:

  1. Dial Prefix for outgoing calls should be different from the Dial Prefix for internal calls, if you choose“8” for the extension you create, please choose other numbers;
  2. FTA5120 has been preconfigured with 2 Outbound Routes. Before customizing the settings, please delete them before proceeding with the related operations.

Inbound Call

  • 1.Navigate to SAS -> SAS Call Route
  • 2.Select an empty route item, click “edit”;
  • 3.Fill in the route name to identify the route for management;
  • 4.Select FXO1 in “Origin”, you can select IVR,Reception,Ring_Grp in destination;
  • 5.Fill in the extension numbers in the blank;
  • 6.Click “Save & Apply”.



The details of Reception, Ring_Grp (Ringing Group) and IVR are as follows

Reception -> All calls from FXO will be forwarded to this extension。
Example: Fill in the extension number 600 in the “Reception” configuration blank 1001, when receiving an incoming call from FXO port, the 1001 will ring.

Ringing Group -> When receiving an incoming call from FXO port, the extensions in the group will ring in sequence.(use “ , “ to divide numbers, e.g. 600,601,602,603)。
Example: Fill “600,601,602,603” in the ringing group, when receiving an incoming call from FXO port, 600 will ring first, 601, 602 and 603 will ring in sequence after the end of ringing of last extension.

IVR -> When receiving an incoming call from FXO port, a voice prompt will be play to help dialing. When caller press 0, the call will be forward to the extension that is filled in “Extension Number”for looking up the number.

Dial Time: Duration time of FXO port ringing, only available when Reception or Ringing group is enable.

Note:

When Ringing Group is enable, Dial Time is the duration time of single extension.

Author:admin  Create time:2023-12-01 18:49
Last editor:Albert  Update time:2023-12-13 17:53